XP-50A jet grouting Anchor Rig a rig uses XP-50A jet grouting project type bolt rig is mainly used for single-pipe can be used for a double tube Jet Grouting, for lifting and rotating jet pipe use, the verticality requirements are not too high Reinforcement Engineering can also play into the hole since the task. Second, the characteristics of a drilling rig, rig torque, with high and low gear, when using the high-speed gear self drilling; 2, rig speed can be adjusted to accommodate a variety of jet grouting operations to enhance the speed of need; 3, rig design compact, stable center of gravity, while skilled workers make good use of the power head pressure, mobile is not difficult; 4, the device adapted to small venues high jet operations. Third, the technical parameters of a drilling depth: 50-60m 2, pile diameter: 400-800mm 3, drill Specifications: 42-50mm single-tube double-barreled 50mm 4, Churning inclination:?? -5 ° to 90 ° 5 The output speed: Positive: 19,38,70,120rpm anti: 16rpm 6, the lifting force: Rated 24kN, maximum 30kN 7, feed force: Rated 16kN, maximum 21kN 8, slide stroke: 2.3 or 1.8m optional 9 Lifting speed: 0-25mm / Min (adjustable) 10, rated torque: 1500N.m 11, Motor Type: Y160L-6 power 11kw 12, Dimensions: length × width × height: 3400 × 1500 × 1700mm 13, rig NW : 950kg